Tundish Nozzles

Tundish Nozzles

These are highly suitable for open casting. We offer two types of Tundish Nozzles as mentioned below:
o Alumina-carbon Tundish Nozzle and Zirconia Insert
o Fully Zirconia Nozzles of different designs

These Zirconia Nozzles are very dense having AP < 5%, Bulk Density > 5.4g/cc and allows a steady flow of metal stream to the mould. Capable of withstanding a casting duration of 12 hours.

1700 0C Furnace

TYPICAL PROPERTIES OF PURGING & SHAPED REFRACTORY PRODUCTS
Product Zirconia Insert Tundish Nozzle
Chemical Analysis (%)
ZrO2 (Min.) % 95
Al2 O3 (Min.) % NA
Fe2 O3 (Max.) % 0.2
MgO (Max.) % NA
SiO2 (Max.) % 2
CaO (Max.) % NA
Physical Properties
A.P. (Max.) % 5
B.D. (gm/cc) Min. 5.2
C.C.S. (Kg./cm2) Min. NA

Regd. Office

31, Makers Chamber-3,
3rd Floor, Nariman Point
Mumbai-400021
Maharashtra. India

Works

4/5 Industrial Estate,
Nandini Road, Bhilai,
Durg-490 026
Chattisgarh, India

Contact

+91 788 4253 333
+91 788 4253 355
+91 788 4253 357

[email protected]

© 2019 All rights reserved.